Updating Parts list from part library

Discussions about features that may or may not be supported by Sherlock in the future. All suggestions are welcomed. Registered users may post to this forum at any time.
Post Reply
Sherlock User
Posts: 2
Joined: 16 Feb 2016, 12:08

Updating Parts list from part library

Post by RussH » 16 Feb 2016, 14:15

Under the Parts heading the drop down menu has "Update Parts Library from Parts List" immediately below the "Update Parts List from Parts Library". One slip of the mouse and one could destroy their local parts library by overwriting it with incorrect component data. Can these two selections be separated to avoid loosing all the locally stored component data? Possibly put one at the top and the other at the bottom of the drop down menu.

Site Admin
Posts: 75
Joined: 01 Nov 2016, 08:43

Re: Updating Parts list from part library

Post by natalieh » 01 Feb 2017, 09:10

Hi Russ,

Thanks for your suggestion. I absolutely agree with you -- there is a risk involved with having both options situated so close together. We will investigate rearranging the options in the Parts drop down menu.
Natalie Hernandez, PhD
Sr. Project Manager
ANSYS DfR Solutions

Post Reply