Material Manger

Discussions about features that may or may not be supported by Sherlock in the future. All suggestions are welcomed. Registered users may post to this forum at any time.
Post Reply
timothyoconnell
Sherlock User
Posts: 1
Joined: 11 Jul 2017, 07:48

Material Manger

Post by timothyoconnell » 27 Mar 2018, 09:29

Will there ever be a way to create a material by stating the percent of each element in the material? For Example Cu 98.5%, Sn 1.5%

natalieh
Site Admin
Posts: 53
Joined: 01 Nov 2016, 08:43

Re: Material Manger

Post by natalieh » 03 Apr 2018, 13:14

Thanks for the request, Tim!

Defining a material in Sherlock requires an in-depth understanding of the mechanical properties of the material. Changing element percentages could have a significant impact on these properties. With this in mind, it is unlikely a model can be developed correlating element percentages to modulus, CTE, etc. unless a ton of rigorous testing was completed.
Natalie Hernandez, PhD
Product Manager
DfR Solutions
nhernandez@dfrsolutions.com

Post Reply