Using the Local Parts Database

Lessons learned and suggestions from other users that might make you more productive when using Sherlock to analyze circuit card reliability. Registered users may post to this forum at any time.
Post Reply
Gil Sharon
Site Admin
Posts: 81
Joined: 25 Mar 2013, 13:10
Contact:

Using the Local Parts Database

Post by Gil Sharon » 01 Oct 2013, 14:03

[attachment=3]UpdateDB_1.png[/attachment]To save a part for future use:
1) Confirm it and all of its properties in the parts list
2) Click Parts>Update parts database from parts list
3) In the “Update Part Database” dialogue window select the “Local Part Database”
4) Click “Update Database”

[attachment=3]UpdateDB_1.png[/attachment]
[attachment=2]UpdateDB_2.png[/attachment]
To update the new projects parts list from the database:
1) Click Parts>Update part list from parts database
2) In the “Update Parts List” dialogue window select the “Local Part Database”, and the other desired parameters
3) Click “Update Parts List”
[attachment=1]UpdateDB_3.png[/attachment]
[attachment=0]UpdateDB_4.png[/attachment]
Attachments
UpdateDB_4.png
UpdateDB_4.png (83.99 KiB) Viewed 4700 times
UpdateDB_3.png
UpdateDB_3.png (6.91 KiB) Viewed 4700 times
UpdateDB_2.png
UpdateDB_2.png (89.74 KiB) Viewed 4700 times
UpdateDB_1.png
UpdateDB_1.png (7 KiB) Viewed 4700 times

Post Reply