Warning message when exporting trace model

Your place to learn and share your experiences with Sherlock. Registered users may post to this forum at any time.
Post Reply
Yaeha kwon
Sherlock User
Posts: 18
Joined: 02 Jun 2015, 18:20

Warning message when exporting trace model

Post by Yaeha kwon » 17 Oct 2016, 05:03

Hi,

I'm trying to export the trace model which is 20*20.
Can somebody explain why the warning message below pops up at the console? And recommend the way to fix it?
I set the grid size as 0.0001 and arc segment as 5 micron.

17:21:11.059 WARNING: clipPolygon(false): No edge choice for (10.9024,14.1318)
17:21:11.059 (3.0293,10.1354) (2.8576,10.1318) (2.6648,10.1318) (2.6648,9.9888) (2.7110,9.9764)

Thanks,
:mrgreen:

natalieh
Site Admin
Posts: 53
Joined: 01 Nov 2016, 08:43

Re: Warning message when exporting trace model

Post by natalieh » 23 Feb 2017, 16:57

Hi Yaeha,

My apologies for the late response.

Were you able to successfully generate a trace model? The error message given identified specific locations: (10.9024,14.1318)
17:21:11.059 (3.0293,10.1354) (2.8576,10.1318) (2.6648,10.1318) (2.6648,9.9888) (2.7110,9.9764). I'd recommend reviewing the traces at these locations to see if the model was completed accurately. Please let me know your findings!

Also, if this issue was resolved off the forum, let me know that as well.
Natalie Hernandez, PhD
Product Manager
DfR Solutions
nhernandez@dfrsolutions.com

Post Reply