In the material manager there are listed the properties to be changed.
There are no units mentioned. Only from the numbers it is possible to guess the units. That could be wrong if you use not common materials.
My proposal is: add the units in the editing window.
Units in material manager
-
- Site Admin
- Posts: 56
- Joined: 01 Nov 2016, 08:43
Re: Units in material manager
Thanks for your suggestion -- currently, we are aware of this issue and are working on it!
For future reference, all units are metric in Sherlock, unless stated otherwise. For practical purposes, length is given in mm and density is incorporated as tonnes/m^3.
For future reference, all units are metric in Sherlock, unless stated otherwise. For practical purposes, length is given in mm and density is incorporated as tonnes/m^3.
-
- Sherlock User
- Posts: 5
- Joined: 26 Aug 2015, 15:43
Re: Units in material manager
Hello Natalie,
I was wondering what the units are for Elastic Modulus in the Material Manager
is it kPa?
RJ
I was wondering what the units are for Elastic Modulus in the Material Manager
is it kPa?
RJ
-
- Site Admin
- Posts: 56
- Joined: 01 Nov 2016, 08:43
Re: Units in material manager
Hi RJ,
The Elastic Moduli are in MPa. In the Material Manager, if you go to the 'Help' menu and select 'Sherlock Material Manager', a Materials Management User Guide should open. Page 3/6 gives some useful information about the material properties' units. Let me know if you have any other questions -- I'd be glad to help!
The Elastic Moduli are in MPa. In the Material Manager, if you go to the 'Help' menu and select 'Sherlock Material Manager', a Materials Management User Guide should open. Page 3/6 gives some useful information about the material properties' units. Let me know if you have any other questions -- I'd be glad to help!
-
- Sherlock User
- Posts: 5
- Joined: 26 Aug 2015, 15:43
Re: Units in material manager
Thanks for the help Natalie
Appreciate it
RJ
Appreciate it
RJ